Screw
1.Screw: double cone single head variable pitch and variable depth collecting screw, hard chrome plating on the surface of the screw edge, cooling water inside the screw.
2.Screw gear and bearing lubrication: the gear and bearing are self-lubricated with thin oil, and the oil level and alarm are displayed on the oil label.
3.Frequency conversion speed regulation, hard tooth surface gear reducer, 6 stages of tooth grinding accuracy.
4.Extruder barrel: hollow cooling structure, hard chrome plating on the working surface.

Tablet device
1.1.Double roll calender, with the unique design of the baffle plate, the required thickness of the film and the film edge is particularly smooth film.
2.Nitride steel roller surface (or alloy chilled cast iron), high wear resistance, water cooling, roller bearing dry oil pump lubrication.
3.3.Frequency conversion speed regulation, hard tooth surface gear reducer, 6 stages of tooth grinding accuracy.
4.Roller distance: manual setting, equipped with locking device.
5.Film edge cutting and tape return device.

Electrical control system
1.The control system adopts PLC and touch screen, and has the electrical signal and communication interface with the mixer and the film cooling machine. The display: the current of screw, speed,the current of tablet part , speed display, alarm control.
2.Have perfect fault alarm and safety stop device.

Model	T1B
Output（T/hour）	max 1T/hour
Match mixer size	75L-110L
Sheet width	400-500mm
Roller distance	3-4mm（sheet thickness is6mm）
Roller diameter	250mm
Roller length	500mm
Roller speed	2-22rpm
Tablet power	18.5KW
Screw speed	2-22rpm
Extruder power	18.5KW