Equipment Introduction - This machine consists of the following parts：

1. Isolation liquid immersion area

A. Isolated from the immersion tank and feed roller composition, the main function for the film before cooling through the isolation liquid immersion, the speed can be matched with the previous equipment (open mill).

B. Isolation liquid immersion tank with external cooling water circul ation system piping, to avoid isolation liquid soaking tank isolation liquid temperature is too high.
C. In this area can be used with print or compression device.
D. In this area can be selected with a stainless steel transmission chain wil automatically enhance the film into the film lifting device surface, without human pull the material into the conveyor belt.
2. Film lifting device.
A. The lifting device consists of a guided conveyor belt. Its role is to lift the film to the top of the conveyor chain, and make the film correctly hanging film.
3. Film cooling conveyor
A. Which is equipped with fim hanging rod, the rod is made of stainles steel welding, hanging rod transmision chain driven by the motor (or pneumatic cylinder) Pole spacing can be designed according to customer needs.

4. Film cooling device

A. Large flow fan with cooling film on the side.

5. Film coolina after the delivery device.

A. Transfer the film from the cooling device to the site where the operator is easy to receive.

B. The customer can according to the automatic grasping device. without the operator will be put from the boom in the rear.

6. Feed temperature detection device.

7. The discharge temperature detection device.

Model		FT-998A
Length of Max Hanging (mm)		1500
Max Sheet Width (mm)		300
Hanging Bar	Pitch (mm)	300
	Bar(PCS)	33
Capacity Length (m)		100
Dimension(L*W*H)(m)		15×2.1×3.5
Max Speed (m/min)		30